Energy-efficient spray foam solutions for Graham, TX. Roofing, insulation, and coatings that reduce energy costs and extend roof life by decades.
Comprehensive spray foam roofing and insulation services tailored for Graham properties.
Stop chasing flat roof leaks with temporary fixes. Our diagnostic approach pinpoints the exact failure point, and our repair methods address the root cause — whether it is failed flashing, membrane damage, or ponding water that needs re-sloping.
Roof leaks get worse with every rain. Our crews respond fast, identify the exact source using infrared and moisture mapping, and apply permanent repairs using spray foam and coating systems designed for long-term performance.
Preventive roof maintenance programs with scheduled inspections, drain cleaning, minor repairs, and detailed photo-documented condition reports. Catch small problems before they become expensive emergencies.
Our commercial restoration process preserves your existing roof structure, adds insulation value, and applies a warranted waterproof coating system — saving 50 to 70 percent versus tear-off and replacement on buildings of any size.
Complete roof restoration with spray foam and protective coatings that add 20 or more years of life to your existing roof — without the cost, waste, and disruption of a full tear-off and replacement.
Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.
Full roof replacement with spray polyurethane foam delivers superior insulation, waterproofing, and wind uplift resistance compared to conventional membrane systems. We strip the old roof, inspect the deck, and install a new SPF system built for decades.
Elastomeric coatings for standing seam, corrugated, and R-panel metal roofs. We seal rust spots, failing fasteners, open seams, and ridge caps — stopping leaks and adding reflective energy savings in a single application.
Comprehensive roof inspections using infrared moisture scanning, core sampling, and visual assessment. Detailed photo-documented reports with condition ratings, remaining life estimates, and prioritized repair recommendations.
Closed-cell and open-cell spray foam attic insulation that eliminates air infiltration and creates a continuous thermal barrier from ridge to eave. Most projects completed in a single day with immediate comfort improvement.
Cold floors, musty smells, and high energy bills often trace back to an uninsulated or poorly insulated crawl space. Our closed-cell spray foam seals the entire crawl space envelope — walls, rim joists, and sill plates — creating a conditioned space.
Spray foam roofs are built to last, but they do need occasional repair. Our crews fix bird pecks, foot traffic damage, hail impacts, and coating wear — extending the life of your SPF system without a costly full recoat.
New spray polyurethane foam roof installation that creates a seamless, self-adhering membrane with the highest R-value per inch of any roofing system. Energy-efficient, leak-proof, and engineered to last 30 to 50 years with periodic recoating.
High-performance silicone roof coatings that resist ponding water, UV degradation, and extreme temperatures. Unlike acrylics, silicone does not re-emulsify in standing water — making it ideal for flat roofs with drainage challenges.
Hail, wind, and debris damage demand immediate attention and thorough documentation. Our crews respond quickly, document all damage with photos and measurements that satisfy insurance adjusters, and restore your roof completely.
Roof leaks and energy waste do not care how small your town is. In Graham, TX, Lapolla Industries provides the same professional spray foam roofing and insulation services that protect large commercial facilities — scaled to fit your property and your budget. We diagnose the real problem, explain your options honestly, and fix it right the first time.
Our Graham customers stay with us because we deliver results, not excuses. Whether it is a persistent flat roof leak, a foam roof that needs recoating, or an attic that turns into a furnace every summer, Lapolla Industries has the equipment and expertise to solve it permanently. One call to (866) 605-0362 is all it takes to get started.
Here is what sets Lapolla Industries apart from other contractors in Graham.
No hidden fees, no surprise charges. You receive a detailed written estimate before we start and the final invoice matches — guaranteed. Every line item explained.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.
Storms do not wait and neither do we. Our emergency crews are on call around the clock to tarp, secure, and protect your property when you need it most.
Common questions about spray foam roofing and insulation in Graham, TX.
A properly installed SPF roof in Graham can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
Closed-cell foam is denser, provides a higher R-value per inch (R-6.5 vs R-3.7), and acts as a vapor and moisture barrier. Open-cell foam is lighter, more flexible, and more affordable. For roofing applications in Graham we typically recommend closed-cell for its waterproofing properties. For interior wall insulation, either type may be appropriate.
Spray foam insulation costs in Graham typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Graham homeowners see a full return on investment through energy savings within 3 to 5 years.
Yes. Every project in Graham begins with a no-obligation roof inspection. Our crews assess the condition of your existing roof, identify problem areas using infrared moisture scanning when needed, and provide a detailed estimate with photos and recommendations. There is never a charge for the initial inspection.
Silicone roof coatings offer the longest service life for flat and low-slope roofs in Graham. Unlike acrylic coatings, silicone does not re-emulsify in ponding water and maintains its flexibility and UV resistance for 15 to 20 years. We recommend silicone for any Graham roof with drainage challenges or heavy weather exposure.
Call us immediately for emergency tarping to prevent further water damage. Our Graham storm damage crews respond quickly to secure your property, document all damage with photos and measurements for your insurance claim, and provide a complete restoration plan. We work directly with insurance adjusters to ensure your claim is handled smoothly.
See what our customers have to say about their experience with Lapolla Industries.
"Lapolla Industries restored the roof on our distribution warehouse without any disruption to our operations. The crew worked in sections and we never had to shut down. The new reflective coating has already reduced our cooling load."
"Got a comprehensive inspection done on our warehouse roof. They found three areas of trapped moisture that were invisible from the surface. The early detection saved us from much more expensive structural repairs down the road."
"Our foam roof had some blistering and a couple of punctures from a maintenance crew walking on it. They repaired everything in one visit — cut out the damaged foam, re-sprayed, and recoated. Good as new."
Lapolla Industries proudly serves property owners in these cities near Graham.